
4GB Kingston DDR4 4GB 2666MT/s Non-ECC Unbuffered DIMM
$430.00 TTD
4GB Kingston DDR4 4GB 2666MT/s Non-ECC Unbuffered DIMM
3 in stock
4GB Kingston DDR4 4GB 2666MT/s Non-ECC Unbuffered DIMM
KVR26N19S6/4 is a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
Power Supply: VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
8 internal banks; 2 groups of 4 banks each
| Weight | 1 lbs |
|---|
Related products
128GB Kingston DataTraveler Exodia M Flash Drive
256GB Kingston DataTraveler Exodia USB Flash Drive
500GB WD Blue SATA Internal Hard Drive (2.5 Laptop)
64GB Kingston DataTraveler microDuo 3C USB Flash Drive
8GB Kingston DDR4 3200MT/s Non-ECC Unbuffered DIMM RAM
8GB Kingston DDR4 3200MT/s RAM
ValueRAM's KVR32N22S6/8 is a 1G x 64-bit (8GB) DDR4-3200 CL22 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-3200 timing of 22-22-22 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Reviews
There are no reviews yet.